How To Fix Any Service On iPhone – The Easy Way

When iPhone says no service is available, it means you can’t use it for basic things like texting, making calls, and using cellular data. The only way to access the internet is by connecting to a Wi-Fi network. You will not be able to use the mobile internet until you have eliminated the error. The same goes for messages and calls. The problem occurs in the areas where there is no network coverage or in the areas where the network coverage is poor, if you can also see the message “Searching for service”. Some other reasons for no service on iPhone are a damaged SIM card, the fact that the card is not properly inserted in the slot, or a software glitch. The problem can also occur after an iOS upgrade.

Before you start solving the problem by trying the solutions listed below, make sure you are in an area that has network coverage. Also, contact your carrier to make sure your account is active.
See also: How to Fix iPhone Stuck in Recovery Mode

Solutions for no service on the iPhone

Switching the airplane mode

The easiest way to solve “No Service on iPhone” problem is to turn on / off airplane mode. You can access Settings >> General >> Airplane Mode. Turn it on. Wait a minute and then turn it off again. The other option is to access the control center.

• Swipe up at the bottom of any screen and Control Center will appear.
• Tap the airplane icon in the top left corner or on the control center screen to turn it on.
• Wait for a minute and then turn it off.

Check the cellular data

If switching airplane mode didn’t fix the problem, try this method. First, make sure your cellular data is turned on.

• Go to Settings >> Cellular >> Cellular Data

If you are traveling abroad, make sure that you have data roaming switched on.

• Open Settings >> Cellular >> Data Roaming

Subscribe to our website: Technobezz

Date and Time

Make sure that the date and time set on your iPhone matches your current time zone. It is best to activate “Set automatically”.

• Connect the iPhone to WiFi
• Go to Settings >> General> Date and Time
• Turn on “Set automatically”

Restart iPhone

Many common problems can be resolved by restarting.

• Press and hold the Sleep / Wake button
• Once you see the slider (the one that says “Slide to turn off”), drag it from left to right.
• After the iPhone turns off completely, wait for at least a minute.
• Turn it back on by pressing and holding the Sleep / Wake button until you see the Apple logo on the screen.

Change “Language & Data”

Changing “Voice and Data” can fix “No Service on iPhone” issue. In this way, many users have fixed the problem. How to proceed:

• Go to Settings >> Cellular >> Cellular Data Option >> Voice & Data.
• If you’re using 4G, switch it to 3G or vice versa.
• Then click the Home button once to return to the home screen and see if your cellular network is available again.

Subscribe to our website: Technobezz

Update of the iPhone operator settings

The iPhone operator settings update includes your operator’s updates to the settings. For example network, call, cellular data, messaging, hotspot and voicemail settings. To update your carrier settings:

• Make sure your iPhone is connected to a stable internet connection.
• Tap “Settings >> General >> About”.
• You will be notified of the update when it becomes available.

Reseat your SIM card

If none of the above methods work, reinsert your SIM card.

• Open the compartment with a paper clip or the SIM eject tool.
• Remove the SIM card and reinsert it correctly.
• Close the tray and see if the problem persists or not.

Note: After removing the SIM card, make sure that the card is not scratched or damaged in any way. If you find any damage, contact your network operator and ask for the SIM card to be replaced. If you don’t see any damage, try inserting the SIM card into another smartphone to see if you have the “No Service” problem. If so, contact your network operator for a replacement.

Update the iOS

The update always brings bug fixes and also improves the security and performance of iOS devices. Therefore it is advisable to update the software when a new version is available. Here’s how to do just that:

• Make sure you are connected to the Wi-Fi network.
• Open Settings >> General >> Software Update.
• Wait for your iPhone to check the availability of the update.
• Tap “Download and Install”.

Reset network settings

This useful method cannot fix any service on iPhone, but it is very effective for many other problems including Bluetooth and Wi-Fi issues. You’ll need to re-enter your Wi-Fi passwords and pair your iPhone with bluetooth devices again. Here’s how to reset network settings:

• Open the settings
• Tap on “General
• Tap on Reset
• Choose Reset Network Settings
• Enter your passcode
• Tap Reset Network Settings to confirm your action.

Reset all settings

This method is safe because you won’t lose any data or media on your iPhone. How to proceed:

• Go to Settings
• Tap General
• Tap on Reset
• Select Reset All Settings.
• Enter a passcode if necessary
• Confirm the action by tapping Reset all settings.

Restore iPhone to Factory Settings with iTunes

No service on iPhone can also be fixed by restoring iPhone using iTunes. Note that this will erase all data on your device, so back up your data beforehand. To factory reset your iPhone, follow the steps below:

• Make sure you have a stable internet connection and the latest version of iTunes software.
• Connect your iPhone to the Mac / PC using a Lightning cable.
• In the “Summary” tab, click “Restore”.
• Before the process begins, iTunes will first load the firmware.
• Wait for the recovery process to complete.
• Once it’s done, set up your iPhone as a new device.

How to fix no service on iPhone after iOS update

Sometimes no service can appear on iPhone after an iOS update. Some users complained about this problem after upgrading their devices to iOS 9.3.
In most cases, all you have to do is wait awhile and give your device some time to calm down after the update. Of course, the wait doesn’t sound too exciting if you can’t send messages or even make calls. There are a couple of things you can try:

• Turn off cellular data by going to Settings> Cellular. After that, turn on airplane mode and leave it on for 15-20 seconds. Turn off airplane mode and turn on cellular data.
• Restart your iPhone
• Put your SIM card back in
• Reset the network settings. Go to “Settings> General> Reset> Reset Network Settings”. Tap “Reset Network Settings” to confirm your action.

Subscribe to our website: Technobezz

No service after jailbreak?

The most common cause of your iPhone running out of service after jailbreaking is incorrect baseband.
The “No Service” error can only be resolved by downgrading the current iPad baseband. Most people jailbreak their iPhone with Redsn0w and upgrade to iPad Baseband. And then they use UltraSn0w to activate their service but it fails.
The iPad baseband is conflicting with network service and interfering with the device’s radio frequency. To successfully get service on your iPhone, follow the procedure explained below.

iPhone no service after jailbreak

• First, download the latest version of RedSn0w
• Download your firmware here (6.0.1)
• After you’ve downloaded RedSn0w, unzip and open it as an administrator
• With Redsn0w open, navigate to extra and ‘select ISPW’ and look for the firmware you just downloaded

• After the process is complete, the kernel and ram have been added. An options screen will appear.

Visit our Apple Troubleshooting guides / iMessage not working

Check if you have downgraded the iPad BaseBand:

• Navigate to Settings> General> About
• Check Install Cydia and downgrade from iPad Baseband.

• After that, your iPhone will restart
• Launch Cydia on your iPhone

• Click the Manage tab at the bottom right

• Choose Start Source

You may read- iPhone won’t connect to WiFi

• To fix iPhone No Service After Jailbreak – click Add in the top left and enter http://repo666.ultrasn0w.com/ as the source url and hit the add source button.

• Choose Back to Cydia
• Select Done in the top right
• Click http://repo666.ultrasn0w.com/ in the source list
• Install and Confirm to Fix iPhone No Service After Jailbreak
• The last step is to restart Spring Board and now you are ready to insert your SIM card into your iPhone 4 / 3Gs / 4s / 5/3 and you should get service.

If this method didn’t resolve the service error after jailbroken your phone and downgraded your iPad baseband then try this one. Make sure to back up all data via iCloud or computer.
Insert your SIM card that does not receive a service error and go to Settings> General> Reset> Reset Network Settings.
You should also read: iPhone won’t charge

All of the above solutions have been shown to be effective in resolving “No Service” error on iPhone 4, iPhone 4s, iPhone 5, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE, and iPhone 7 Fix iPhone 7 Plus.
If you’ve tried the solutions above and nothing worked, contact your network operator. You can also contact the Genius Bar or your nearest Apple Authorized Service Provider.